Fiber modules in the USA

To put it simply, a Fiber module is a transceiver that has a small form factor and is plugged into a network interface card. That means a switch, router, or another piece of communication hardware can use a fiber transceiver as an interface. We at GE Equipment deals in all kind of fiber modules in the USA.


A modern fiber optic transceiver is a compact piece of hardware designed to plug into the aforementioned network nodes. this sort of transceiver is known as a small form-factor pluggable fiber module in the USAIt is used to transform electrical signals into optical (fiber) ones (copper). Since a fiber optic transceiver is functionally equivalent to a GBIC transceiver, the two terms are often used interchangeably.


Best Fiber Modules in the USA to buy

1000BASE-SX transceiver

Among one of top fiber modules in the USA is 100BASE-SX tranceiver.  “1000BASE” indicates a Gigabit Ethernet connection, “X” indicates Gigabit Ethernet block coding, and “S” indicates a short-range multi-mode optical cable. This protocol is widely used for in-building connections in large office complexes and data centers.


As a general rule, 1000BASE-SX may operate across much greater distances if the fiber is of high enough quality and the terminations and optics are properly installed.

  • It communicates over distances of up to 550 meters employing multimode fiber with a frequency of 770 to 860 nm.
  • When using either single-mode or multimode fiber-optic cabling, 1000BASE-LX SFPs may transmit data over a maximum distance of 10 kilometers.


10GBASE-T fibre Module

The 10G copper transceivers that meet MSA standards are designed to transmit data at 10 Gbps over uninsulated twisted-pair cabling. Copper cables aren’t what SFP ports were designed for; instead, they’re meant to carry fiber modules in the USA.



  •  10Gig copper SFP+ modules have a very limited operating range. There is a limit of 30m, 50m, or 80m for 10Gig speeds when using copper RJ-45 SFP+ modules.
  • When compared to standard copper 10Gig switches or NICs, SFPs just don’t have the power to send a 10Gig signal the whole 100 meters.


Different Kinds of Fiber Modules:

Primarily, there are two kind of fiber modules, which are as follows:

Single-mode fiber (SMF) module:

Single-mode fiber module in the USA has a smaller core and a shorter wavelength path. This means that SMF has a higher bit rate and can send data over longer distances.


  • With a range of 2 km to 120 km, SMF SFPs are capable of functioning at wavelengths of 1310 nm and 1550 nm.
  • The appropriate fiber optic patch cord is yellow in color;
  • the color-coded bale clasp and the color arrow on the label are typically blue, yellow, or purple.

Fiber modules

Multi-Mode fiber module:

Multi-mode fibers modules in the USA have a significantly larger core and can transmit longer-wavelength light. Since MMF optics are more cost-effective, they are used in MMF SFPs for transmissions over shorter distances, often up to 500 m. The typical operating wavelength of an MMF SFP is 850 nm. Multiple optical signals can be transmitted, but not over very great distances.


  • MMF SFPs, like SMF Optics, are identified by the hue of their Bale Clasps.
  • Multi-mode SFPs can be recognized by their black bale clasps.
  • Orange is the color of the pigtail or patch cord used with compatible fiber optics.
  • Distances of up to 100 meters can be achieved by the use of standard CAT 5 UTP copper cabling.


Fiber modules at GE Equipment:

Most transceivers have two ports—one for sending signals and another for receiving them—to compensate for the one-way nature of a fiber-optic link. Single-cable solutions are also available, but they can only send or receive data in one direction at a time. The transceiver’s opposite end is tailored to a certain model of enterprise-grade Ethernet switch, firewall, router, or network interface card.


Looking for best fiber module in the USA? Look no further, you are at a right place. GE equipment deals in all kind of industrial equipment. For further information go call us right away.

Follow us:


What is the function of fiber modules? 

Using a fiber-optic module, an electrical device can be linked to a fiber-optic cable. Each fiber optic in the module is custom-made from a wide range of individual parts to meet a specific set of requirements.


What is SFP interface? 

Compact Form-factor Pluggable (SFP) is a network interface module format used in both data communications and telecommunications that is small, pluggable in and out on the fly.

Other Products in the USA on Greenway Enterprises