The Megger 246004 BITE 2P Battery Impedance Tester is a high-tech device that checks the health of lead-acid and nickel-cadmium cells up to 7000 Ah. Advanced features like Pass/Warning/Fail calculations, advanced printing functions, and a carrying case for standard and optional tools are all built in. A test current is sent across the battery string online by the BITE 2P, which then measures the total current, voltage drop, impedance, DC voltage, and connector resistance. It saves these readings in its memory, which can be used to determine how battery systems are doing.

Battery: 

 As part of a battery care plan, impedance readings can be taken and written down every six months for flooded batteries of Megger 246004 and every three months for VRLA batteries. The BITE 2P test doesn’t drain or stress the battery like load cycle testing does, and it only takes less than 20 seconds to test each cell and intercell connection.

Tests: 

 The Megger 246004 comes with everything you need to do these tests, and you can also get a wide range of extras to make it even better. It has a built-in printer so you can review the test results and leave a hard copy of the record on the spot. Readings can be downloaded to a PC for data interpretation.

Features of Megger 246004: 

• It checks the DC voltage and resistance of all lead-acid and nickel-cadmium cells up to 7000 Ah.
• Advanced printing options are available from the built-in thermal printer.
• Offers Pass/Warning/Fail signs on board
• Strong, repeatable tools
• No pause is needed for online testing.
• Measures AC ripple current to check the state of the charger
• It needs no battery discharge
• Receivers can save data to PowerDB software to analyse it quickly and easily.
• Test time cut down: each cell now takes less than 3 seconds.
• It can save over 2,000 sets of readings for up to 300 tests.